A home lab runs around the clock, so a few watts here and there add up on the power bill. Enter how many of each device you run, adjust the watts if you know your own numbers, and set your electricity rate to see the monthly and yearly cost.
| Device | How many | Watts each |
|---|---|---|
| Mini PC, Intel N100 / N150 classidle to light load | ||
| Mini PC, Ryzen 7 / Core i7 classidle to light load | ||
| Raspberry Pi 5idle to light load | ||
| 2-bay NAS with drivesdrives spinning | ||
| 4-bay NAS with drivesdrives spinning | ||
| Extra 3.5-inch hard driveeach, spinning | ||
| Old desktop used as a servervaries widely | ||
| 1U / 2U rack servervaries widely | ||
| Gigabit switch, 8 portnot counting PoE | ||
| Router or firewall box | ||
| Wi-Fi access pointif not on PoE | ||
| Modem or fibre ONT | ||
| Something elseenter its watts |
Watts are typical idle-to-light-load figures, not maximums. Your own hardware can be well above or below them.
- Devices–
- UPS losses–
- Energy per month–
- Energy per year–
- Every extra watt running costs–
The default rate of $0.17 per kWh is close to the recent US residential average. Rates vary a lot by state, province and time of use, so use the figure from your own bill, including delivery charges if you pay per kWh for them.
How the cost is worked out
Cost per month = total watts × hours per day × 30.4 days ÷ 1,000 × your rate per kWh. A device that draws 10 W all day uses about 7.3 kWh a month, or roughly 88 kWh a year.
A UPS uses some power itself while it keeps its battery charged and conditions the output. Line-interactive units usually lose only a few percent; online (double-conversion) units lose more because they convert all the power twice.
Getting real numbers
The figures in the table are starting points. The most accurate way to know your draw is to measure it: a plug-in energy meter or a smart plug with energy monitoring shows the real wattage of a device or a whole power strip. Hard drives, transcoding and VMs under load can push a box well past its idle figure, while drive spin-down and CPU power limits pull it down.
Ways to cut the bill
- Consolidate. One efficient mini PC running several containers or VMs usually draws far less than an old tower plus a separate NAS.
- Let drives sleep. Spin-down on lightly used NAS drives can save several watts per drive.
- Retire old enterprise gear. A 120 W rack server costs roughly ten times as much to run as a 12 W mini PC doing the same light job.
- Check the UPS. Size it to the load you actually have; a much larger online unit can waste more than it protects.
Related: UPS runtime calculator · Which mini PC? picker · Best UPS battery backup · Today’s home lab deals