GL.iNet Buyer’s Guide 2026: Travel Routers and Comet KVM Compared

Networking equipment with connected cables, showcasing modern technology infrastructure.
Photo: Vladimir Srajber / Pexels

Links to the GL.iNet store are affiliate links. HomeNode.tech may earn from purchases made through them at no extra cost to you. Specs are from GL.iNet’s published product pages; check the product page before buying.

What You’re Actually Choosing Between

A pocket travel router and a remote KVM solve two different problems. One keeps your own laptop, phone and tablet connected and protected when you’re on hotel Wi-Fi or a shared network. The other lets you reach a server, workstation or piece of lab equipment from somewhere else entirely, even when the local network is down. GL.iNet makes both, and this guide lines up the current travel router lineup alongside the Comet remote KVM family so you can see which device actually matches what you’re trying to do.

Model Category Connectivity VPN / Data Throughput Standout Spec
Opal (GL-SFT1200) Travel Router Max. 300 Mbps (2.4GHz) + 867 Mbps (5GHz), 3 x Gigabit ports not listed – check the product page Compact, minimalist design for small spaces
Slate AX (GL-AXT1800) Travel Router Wi-Fi 6, Max. 600 Mbps (2.4GHz) + 1200 Mbps (5GHz) OpenVPN up to 560 Mbps (with DCO), WireGuard up to 550 Mbps IPQ6000 1.2GHz quad-core processor, file sharing support
Beryl AX (GL-MT3000) Travel Router Wi-Fi 6, Max. 574 Mbps (2.4GHz) + 2402 Mbps (5GHz), 2.5G WAN port OpenVPN up to 150 Mbps, WireGuard up to 300 Mbps MT7981B 1.3GHz dual-core processor
Beryl 7 (GL-MT3600BE) Travel Router Wi-Fi 7, Max. 688 Mbps (2.4GHz) + 2882 Mbps (5GHz) WireGuard up to 1,100 Mbps, OpenVPN-DCO up to 1,000 Mbps USB-C PD charging, 120+ concurrent devices supported
Mudi 7 (GL-E5800) Travel Router (5G cellular) 5G NR tri-band Wi-Fi 7, dual SIM capable, LTE Cat 20 (DL) / Cat 18 (UL) not listed – check the product page 3GPP Rel-17 NSA/SA 5G NR support
Comet Q (GL-RMQ1) Remote KVM Wi-Fi 6 802.11ax dual-band, USB-C not applicable 1.8″ touchscreen, 78.5g, single-cable setup
Comet X (GL-RM4PE) Remote KVM PoE-powered Ethernet not applicable Quad-port control, 4K@30FPS, 64GB eMMC storage
Comet 5G (GL-RM10RC) Remote KVM 5G RedCap + Wi-Fi 6 + Ethernet with auto-failover not applicable 64GB eMMC storage, 3.69″ touchscreen

Opal (GL-SFT1200): The Simple Starting Point

Opal is built for people who just want a private pocket network without fuss. It runs dual-band Wi-Fi rated at a maximum of 300 Mbps on 2.4GHz and 867 Mbps on 5GHz, with three Gigabit ports on board. GL.iNet markets it around VPN security generally, but specific VPN throughput numbers aren’t listed – check the product page if that’s a deciding factor. If your main goal is turning a single Ethernet jack in a hotel room into a private Wi-Fi bubble, this is the entry point in the lineup.

Slate AX (GL-AXT1800): Faster Wi-Fi, Faster VPN

Slate AX steps up to Wi-Fi 6 and a quad-core IPQ6000 processor clocked at 1.2GHz. Combined wireless speed tops out at 600 Mbps on 2.4GHz and 1200 Mbps on 5GHz. Where it separates itself is VPN performance: OpenVPN reaches up to 560 Mbps with DCO support, and WireGuard hits up to 550 Mbps. That’s a meaningful jump over older travel routers if you tunnel most of your traffic through a VPN while traveling. File sharing support is also built in, useful for pulling photos or documents off a USB drive while connected.

Beryl AX (GL-MT3000): Built for Heavier Daily Use

Beryl AX runs an MT7981B 1.3GHz dual-core chip and pushes combined Wi-Fi speed to 574 Mbps (2.4GHz) plus 2402 Mbps (5GHz), noticeably higher on the 5GHz band than Slate AX. It also includes a 2.5G multi-gigabit WAN port, which matters if your home or office internet plan exceeds standard Gigabit speeds. VPN throughput is listed at up to 150 Mbps on OpenVPN and up to 300 Mbps on WireGuard. GL.iNet positions this one for households with heavier Wi-Fi demand who also want something compact enough to travel with.

Beryl 7 (GL-MT3600BE): The Fastest VPN in the Travel Lineup

Beryl 7 is described by GL.iNet as the fastest VPN performer in its travel router range, reaching up to 1,100 Mbps on WireGuard and up to 1,000 Mbps on OpenVPN-DCO. Wi-Fi 7 brings combined speeds of 688 Mbps (2.4GHz) and 2,882 Mbps (5GHz). It supports USB-C Power Delivery, so a standard phone charger cable can power it instead of a dedicated brick, which cuts down on what you need to pack. GL.iNet states it can handle more than 120 devices connected at once. For anyone who routes a lot of traffic through a VPN and doesn’t want speed to suffer, this is the router built for that specific job.

Mudi 7 (GL-E5800): When There’s No Wi-Fi to Join

Mudi 7 is the one built for places without any existing network to latch onto. It supports 5G NR in both NSA and SA modes under 3GPP Release 17, with an extensive list of supported bands depending on the NA or EU version, plus LTE Cat 20 download and Cat 18 upload. Dual SIM capability is mentioned in the product data. Specific Wi-Fi throughput figures for Mudi 7 aren’t listed – check the product page before comparing it against the pure Wi-Fi travel routers above. This is a different category of device: it’s less about joining someone else’s network well and more about carrying your own cellular connection with you.

Comet KVM Family: Reaching a Machine You’re Not Standing In Front Of

The Comet devices solve a completely different problem than the routers above. Instead of connecting your devices to the internet, they let you see and control a server, PC or piece of hardware from somewhere else, including situations where the local network itself has failed.

Comet Q (GL-RMQ1)

Comet Q is the lightest and simplest of the three, weighing 78.5g with a single USB-C cable for setup. It connects over Wi-Fi 6 802.11ax dual-band, includes a 1.8 inch built-in touchscreen, 512 MB NAND storage, and runs on a dual-core ARM Cortex-A53 chip. It supports Tailscale and ZeroTier for remote access and works across browser or app, with offline and sleep mode access included.

Comet X (GL-RM4PE)

Comet X is built for racks rather than desks. It controls up to four servers at once at 4K@30FPS over browser or app, and takes power directly over Ethernet via PoE, which cuts down on cable clutter in a server room. A touchscreen shows device IP, online status and active sessions at a glance, and 64 GB of eMMC storage gives it room for an ISO image repository for OS deployment or emergency recovery. Local control via an attached keyboard, mouse and monitor is also supported.

Comet 5G (GL-RM10RC)

Comet 5G adds a path that doesn’t depend on the local network at all. It connects over 5G RedCap with SIM support, and switches automatically between Ethernet, Wi-Fi and cellular if the primary connection drops. A “Nearby Control” mode provides a self-contained wireless signal for instant local BIOS access, independent of the site’s own network. It carries the same 64 GB eMMC storage as Comet X, a 3.69 inch touchscreen, and 4K@30FPS video over H.264, with browser-based access from Windows, macOS or Linux and no app required.

What to Check Before You Buy

  • Confirm which Wi-Fi standard you actually need. Wi-Fi 7 models like Beryl 7 only show their advantage with Wi-Fi 7 capable devices on the other end; older laptops and phones won’t see the full numbers listed in the table.
  • Match VPN protocol to your provider. The throughput figures above are split between OpenVPN and WireGuard, and the two numbers on the same router can differ substantially.
  • For Comet devices, decide whether you need multi-port rack control (Comet X), the lightest possible single-device setup (Comet Q), or a cellular failover path (Comet 5G).
  • If you’re buying a Comet unit for travel or fieldwork, GL.iNet sells a KVM Organizer Pouch Case built to fit the Comet series, and a PoE Splitter accessory for powering compatible units over Ethernet where outlets are hard to reach.
  • Double-check regional availability directly on the product page before ordering, since some GL.iNet models are restricted in certain markets.
  • Any spec not shown above, such as VPN speed for Opal or Wi-Fi throughput for Mudi 7, is marked “not listed – check the product page” rather than guessed at. Confirm those figures directly with GL.iNet before comparing models closely.

Which One Fits

If you want the simplest possible travel setup and don’t push heavy VPN traffic, Opal covers the basics. If VPN speed over Wi-Fi 6 matters more, Slate AX is the better fit. Households that need stronger 5GHz performance and a multi-gig WAN port should look at Beryl AX, while anyone chasing the fastest VPN numbers in the lineup should go straight to Beryl 7. Mudi 7 stands apart: it’s the pick when there’s no existing network to join at all and you need your own cellular connection instead.

On the KVM side, Comet Q suits a single device and the lightest possible footprint. Comet X is built for anyone managing multiple servers in a rack. Comet 5G is the one to pick when the network itself can’t be trusted to stay up, since it carries its own cellular failover path independent of the site’s infrastructure.

General information only, not professional advice. Details can change or contain errors, so check with the manufacturer or an official source before you rely on them. Use of this site is subject to our Disclaimer and Terms of Service.

For general informational purposes only; not professional advice. Posts may contain affiliate links. Learn more.
Scroll to Top