Planning a Proxmox box or another home server that runs several virtual machines and containers? Pick the services you want to run, adjust the RAM, vCPU and disk figures if you know better, and this calculator adds them up with the host’s own overhead and ZFS cache, then suggests a hardware tier.
| VM or container | How many | RAM GB | vCPU | Disk GB |
|---|---|---|---|---|
| Home Assistant OS (VM)HA docs minimum: 2 GB, 2 vCPU | ||||
| Pi-hole or AdGuard Home (LXC)Pi-hole docs: 512 MB, 4 GB disk | ||||
| Jellyfin or Plexmedia files stored separately | ||||
| Frigate NVRFrigate docs: 4 GB basic, 8 GB+ with enrichments | ||||
| Immich photosImmich docs: 6 GB min, 8 GB recommended | ||||
| TrueNAS (VM)TrueNAS docs: 8 GB minimum | ||||
| Nextcloudtypical; files stored separately | ||||
| Docker host VM (several containers)typical | ||||
| General Linux VM or LXCtypical | ||||
| Windows 11 VMMicrosoft minimum: 4 GB, 64 GB | ||||
| WireGuard, Tailscale or reverse proxy (LXC)typical | ||||
| Something elseenter its numbers |
Figures marked “docs” are the minimums from each project’s own documentation; “typical” figures are common starting points. Disk is the VM or container’s own system disk, not your media, photos or recordings.
How this is calculated
- RAM = the RAM of every guest + 2 GB for the host + ZFS ARC (if used), plus the headroom you set, rounded up to a common memory size. The 2 GB host figure is the Proxmox VE recommended minimum for the OS and its services.
- ZFS ARC uses the Proxmox rule of thumb of 2 GB base + 1 GB per TB of pool storage. Proxmox VE 8.1 and later cap the ARC at 10% of RAM (up to 16 GB) by default on new installs, so ZFS will run with less, just with a smaller read cache.
- CPU cores = whichever is larger: the biggest single VM’s vCPU count, or half the total vCPUs. Most home services sit idle most of the time, so sharing cores this way is normal. If several guests are busy at once (transcoding, game servers, builds), plan one core per vCPU.
- Storage = all guest system disks + 32 GB for the host, rounded up to a common SSD size. Keep media, photos and camera recordings on separate drives or a NAS.
Sources for the defaults
Minimums come from each project’s own documentation, checked November 20, 2026: Proxmox VE system requirements, Proxmox ZFS memory guidance, Home Assistant OS VM requirements, Pi-hole prerequisites, Frigate planning guide, Immich requirements and the TrueNAS hardware guide. Real use is often higher than the minimum, especially for Frigate with many cameras and Immich during the first photo import.
VM or container?
On Proxmox, an LXC container shares the host’s kernel and uses noticeably less RAM than a full VM running the same service. Lightweight Linux services such as Pi-hole, a reverse proxy or Jellyfin often run well in containers. Home Assistant OS, TrueNAS and Windows need a full VM.
Related: Which mini PC? picker · Best N150 and N100 mini PCs for a home server · HP EliteDesk Proxmox home server build · Best NVMe SSD for Proxmox and VM storage